Home About Us Products Applications Quality News Testimonials Enquiry Contact Us
  PTC Thermistors
  Thermistor Protection Relay
  Resistance Temperature Detector (RTD)
  Single and Dual Element Stator Winding RTDs
  Thermal Overload Protector (TOP)
  Electric Motor Anti-Condensation Heater
  Thermowells
     
  Thermistor Protection Relay


 
  The Brain that provides round the clock protection for your electric motor  
 
The Thermistor Protection Relay TSDIN01 is used for tripping motors, transformers etc. whenever the excessive temperature developes in the winding.The Relay controlled by thermistors guarantee first of all the thermal overload protection of electrical machines. The switching point of the complete protection is specified by the nominal response temperature of the used thermistors. Appliances with two input circuits offer the possibility of warning and shut-off.
 
     
 
The thermistor Protection Relay TSDIN01 can be combined with all thermistors with a characteristic curve according to DIN 44081 / 082
 
     
  Function and Applications  
 
After mounting the thermistor detectors into e.g. the winding tips of the protected motors, the release is connected. The number of the connectable PTC according to DIN is only limited by its total resistance R25. If the temperature in one of the controlled parts or areas increases over the nominal response temperature of the respective PTC sensor e.g. by:
 
     
 
Blocking rotor
Aggravated start-up
Counter current operation
Under-voltage or phases break down
 
     
 
So this becomes high resistive and the thermistor release shuts off the motor protection switch over a relay. Dependent on the type of release a switch-back occurs after cooling down of about 2 .. 5 K. For cases of application at which an automatic re-start is not suggestive or not acceptable, thermistor release device with power-on blocking are available. For this design has to be made a manual unlocking to re-start the machine after a thermal shut-off.
 
     
  Key Features:  
 
Various input voltages
DIN Channel and chassis mounting
Very compact size
1NC & 1 NO potential-free contacts.
 
     
     
     
 
Being a quality conscious company, we place quality as the nucleus of all our endeavors. Our quality inspectors carefully monitor the entire production process at every level of operation to check that our products conform to relevant quality.
 
 
 
Special attention is given on the procurement of the raw material. We conduct periodic inspections and conduct various tests to make our products flawless. Each and every piece is tested to ensure that it performs efficiently after the consignmen
 
     
  More >>  
  Click here to download our Catalogue
 
 
 
Home        |        Trade Enquiry        |        Applications        |        Quality        |        Testimonials        |        Contact Us
 
Copyright @ Thermo System 2011.   |   Designed & Developed by : Perfect View Media